| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Cellular Communication | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002LJD003X |
| Title: CELLULAR COMMUNICATION: MAYDAY ECU: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
4. REMOVE TELEPHONE ECU ASSEMBLY WITH BRACKET
|
(a) Disconnect the connectors and 2 clamps. |
|
(b) Remove the 4 bolts and ECU with bracket. |
5. REMOVE MAYDAY BATTERY WITH BRACKET
6. REMOVE TELEPHONE ECU ASSEMBLY
|
(a) Remove the 4 screws and ECU together with the No. 1 telephone bracket from the No. 2 telephone bracket. |
|
(b) Remove the 2 screws and No. 1 telephone bracket. |
|
|