1. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

(a) Install the headlight cleaner motor and pump together with the gasket in the direction shown in the illustration. HINT: Make sure the gasket is positioned as shown in the illustration.

(b) Connect the connector.

2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY

(a) Temporarily install the windshield washer jar with the 4 bolts.

(b) Tighten the 4 bolts in the order shown in the illustration to install the windshield washer jar.

Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)

(c) Connect the headlight cleaner hose to the windshield washer jar and pump.

(d) Connect the 2 connectors.

(e) Attach the clamp.