Home › Engine/Hybrid System › Starting › 3UR-FE STARTING: STARTER
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Starting
Model Year: 2008 Model: LX570 Doc ID: RM000002MDK00DX
Title: 3UR-FE STARTING: STARTER: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL STARTER ASSEMBLY

(a) Install the flywheel housing side cover.

(b) Install the starter with the 2 bolts.

Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)


(c) Install the starter wire with the nut.

Torque: 9.8 N·m (100 kgf·cm, 87 in·lbf)

(d) Connect the starter connector.

2. INSTALL STARTER COVER

(a) Install the starter cover with the 3 bolts.

Torque: 12 N·m (122 kgf·cm, 9 ft·lbf)

3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

(a) Install the exhaust manifold RH 3UR-FE INTAKE / EXHAUST: EXHAUST MANIFOLD: INSTALLATION (2008 LX570) .

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .