Home › Engine/Hybrid System › Starting › 3UR-FE STARTING: ENGINE SWITCH
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Starting
Model Year: 2008 Model: LX570 Doc ID: RM000002MDS00CX
Title: 3UR-FE STARTING: ENGINE SWITCH: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Attach the 2 claws to install the switch.

(b) Connect the switch connector.

2. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .