| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Cellular Communication | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002O6S007X |
| Title: CELLULAR COMMUNICATION: TELEPHONE ANTENNA: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE ROOF HEADLINING ASSEMBLY
(a) Remove the roof headlining
.
4. REMOVE NO. 5 REAR ROOF AIR DUCT
5. REMOVE NO. 4 REAR ROOF AIR DUCT
6. REMOVE NO. 3 REAR ROOF AIR DUCT
7. REMOVE TELEPHONE ANTENNA ASSEMBLY
|
(a) Detach the 4 claws and remove the 2 antenna cord connectors from the protector. |
|
(b) Detach the 2 claws and remove the protector. |
|
(c) Disconnect the 2 antenna cord connectors. |
|
(d) Remove the antenna nut. |
|
(e) Detach the 2 claws and remove the telephone antenna. |
|
|