Home › Engine/Hybrid System › Engine Control › 3UR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: LX570 Doc ID: RM000002PQ800GX
Title: 3UR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE NO. 2 ENGINE UNDER COVER AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 LX570)+

2. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR

(a) Remove the 2 bolts and sensor protector.

3. REMOVE CRANKSHAFT POSITION SENSOR



(a) Disconnect the sensor connector.

(b) Remove the bolt and sensor.