Home › Vehicle Interior › Theft Deterrent/Keyless Entry › ELECTRICAL KEY OSCILLATOR (for Front Floor)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Theft Deterrent/Keyless Entry
Model Year: 2008 Model: LX570 Doc ID: RM000002QFO00CX
Title: THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Front Floor): REMOVAL (2008 LX570)

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

2. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

3. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

(a) Detach the 7 claws.

(b) Disconnect the connectors and remove the position indicator housing.

4. REMOVE INDOOR ELECTRICAL KEY OSCILLATOR

(a) Disconnect the connector.

(b) Remove the screw and electrical key oscillator.

(c) Detach the 2 claws and remove the bracket.