Home › Engine/Hybrid System › Lubrication › 3UR-FE LUBRICATION: OIL PRESSURE SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Lubrication
Model Year: 2008 Model: LX570 Doc ID: RM000002RTH00FX
Title: 3UR-FE LUBRICATION: OIL PRESSURE SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 LX570)+

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 LX570)+

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 3UR-FE INTAKE / EXHAUST: EXHAUST MANIFOLD: REMOVAL (2008 LX570)+

4. DRAIN ENGINE OIL 3UR-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 LX570)+

5. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

(a) Disconnect the sender gauge connector.

(b) Remove the oil pressure sender gauge.