| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002V0L003X |
| Title: AUDIO / VIDEO: HARD DISK DRIVE: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY
(a) Remove the display and navigation module display
.
4. REMOVE DISC PLAYER DISC
(a) Remove the 2 screws.
|
(b) Move the cover in the direction of the arrow shown in the illustration to remove it. |
|
(c) Remove the disc player disc in the direction of the arrow shown in the illustration. |
|
|