Home › Vehicle Interior › Heating/Air Conditioning › AIR CONDITIONING PRESSURE SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Heating/Air Conditioning
Model Year: 2008 Model: LX570 Doc ID: RM0000030JG005X
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL AIR CONDITIONER PRESSURE SENSOR



(a) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pressure sensor.

Compressor oil:

ND-OIL 8 or equivalent

(b) Install the O-ring to the pressure sensor.

(c) Install the pressure sensor.

Torque: 10.8 N·m (110 kgf·cm, 8 ft·lbf)

(d) Connect the connector.

2. CHARGE REFRIGERANT HEATING / AIR CONDITIONING: REFRIGERANT: REPLACEMENT (2008 LX570)+

3. WARM UP ENGINE HEATING / AIR CONDITIONING: REFRIGERANT: REPLACEMENT (2008 LX570)+

4. CHECK FOR REFRIGERANT GAS LEAK HEATING / AIR CONDITIONING: REFRIGERANT: REPLACEMENT (2008 LX570)+

5. INSTALL FRONT BUMPER COVER

(a) Install the front bumper cover EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION (2008 LX570) .