| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Emission Control | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000030WI006X |
| Title: 3UR-FE EMISSION CONTROL: PURGE VALVE: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL PURGE VSV
|
(a) Install the purge VSV with the bolt. Torque: 21 N·m (214 kgf·cm, 15 ft·lbf) |
(b) Connect the purge VSV connector.
2. CONNECT PURGE LINE HOSE
(a) Connect the 2 hoses.
HINT:
Turn the claw of the clip to the upper side.
3. INSTALL V-BANK COVER SUB-ASSEMBLY
|
|