Home › Drivetrain › Axle/Differential › AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Drivetrain Section: Axle/Differential
Model Year: 2008 Model: LX570 Doc ID: RM00000318E006X
Title: AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

(a) Install a new gasket.

(b) Install the differential carrier with the 10 washers and 10 nuts.

Torque: 72 N·m (734 kgf·cm, 53 ft·lbf)

2. CONNECT PROPELLER SHAFT ASSEMBLY

(a) Align the matchmarks on the propeller shaft flange and differential flange.

(b) Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)

3. INSTALL REAR AXLE SHAFT

(a) Install the axle shaft AXLE AND DIFFERENTIAL: REAR AXLE SHAFT: INSTALLATION (2008 LX570) .

4. ADD DIFFERENTIAL OIL AXLE AND DIFFERENTIAL: DIFFERENTIAL OIL: REPLACEMENT (2008 LX570)+