Home › Engine/Hybrid System › Engine Control › 3UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: LX570 Doc ID: RM0000031Y7004X
Title: 3UR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

2. REMOVE ENGINE ROOM SIDE COVER RH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

3. REMOVE UPPER RADIATOR SUPPORT SEAL EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

4. REMOVE V-BANK COVER SUB-ASSEMBLY 3UR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: REMOVAL (2008 LX570)+

5. REMOVE AIR CLEANER HOSE ASSEMBLY 3UR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL (2008 LX570)+

6. REMOVE CAMSHAFT POSITION SENSOR



(a) Disconnect the sensor connector.

(b) Remove the bolt and sensor.

7. REMOVE VVT SENSOR

(a) Disconnect the 4 sensor connectors.

(b) Remove the 4 bolts and 4 sensors.