Home › Vehicle Exterior › Exterior Panels/Trim › BACK DOOR GARNISH (for Upper Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: LX570 Doc ID: RM0000038M8002X
Title: EXTERIOR PANELS / TRIM: BACK DOOR GARNISH (for Upper Side): INSTALLATION (2008 LX570)

INSTALLATION

HINT:

A bolt without a torque specification is shown in the standard bolt chart SPECIFICATIONS: STANDARD BOLT: SPECIFIED TORQUE FOR STANDARD BOLTS (2008 LX570) .

1. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE



(a) Attach the 3 clips to install the garnish.

(b) Install the 2 nuts.

2. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION (2008 LX570)+

3. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door) DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

4. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door) DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

5. INSTALL LOWER BACK DOOR STOPPER CUSHION DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+