Home › Vehicle Exterior › Exterior Panels/Trim › BACK DOOR GARNISH (for Upper Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: LX570 Doc ID: RM0000038MA002X
Title: EXTERIOR PANELS / TRIM: BACK DOOR GARNISH (for Upper Side): REMOVAL (2008 LX570)

REMOVAL

1. REMOVE LOWER BACK DOOR STOPPER CUSHION DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

2. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door) DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

3. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door) DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

4. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: REMOVAL (2008 LX570)+

5. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE



(a) Put protective tape around the back door garnish.

(b) Remove the 2 nuts.

(c) Detach the 3 clips and remove the garnish.

HINT:

Detach the clips from the backside of the garnish.