Home › Vehicle Exterior › Lighting (ext) › FOG LIGHT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: LX570 Doc ID: RM0000038WF002X
Title: LIGHTING (EXT): FOG LIGHT ASSEMBLY: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL FOG LIGHT ASSEMBLY LH

(a) Install the fog light with the 4 screws.

Torque: 5.0 N·m (51 kgf·cm, 44 in·lbf)

(b) Attach the clamp.

2. INSTALL FRONT BUMPER

(a) Install the front bumper EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION (2008 LX570) .

3. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT LIGHTING (EXT): FOG LIGHT ASSEMBLY: ADJUSTMENT (2008 LX570)+

4. PREPARATION FOR FOG LIGHT AIMING LIGHTING (EXT): FOG LIGHT ASSEMBLY: ADJUSTMENT (2008 LX570)+

5. INSPECT FOG LIGHT AIMING LIGHTING (EXT): FOG LIGHT ASSEMBLY: ADJUSTMENT (2008 LX570)+

6. ADJUST FOG LIGHT AIMING LIGHTING (EXT): FOG LIGHT ASSEMBLY: ADJUSTMENT (2008 LX570)+