Home › Vehicle Exterior › Lighting (ext) › BACK-UP LIGHT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: LX570 Doc ID: RM0000038WX003X
Title: LIGHTING (EXT): BACK-UP LIGHT ASSEMBLY: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 LX570)+

2. REMOVE BACK DOOR TRIM COVER LH DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

3. REMOVE BACK DOOR TRIM COVER RH DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

4. REMOVE BACK DOOR TRIM PANEL ASSEMBLY DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

5. REMOVE BACK-UP LIGHT LENS AND BODY LH

(a) Remove the 2 screws and bracket.

(b) Detach the clip and disconnect the connector.

(c) Remove the 3 screws and light lens and body.