Home › Vehicle Interior › Seat › LUMBAR SWITCH
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: LX570 Doc ID: RM00000394O002X
Title: SEAT: LUMBAR SWITCH: INSTALLATION (2008 LX570)

INSTALLATION

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

1. INSTALL LUMBAR SWITCH



(a) Install the switch with the 2 screws.

2. INSTALL FRONT SEAT CUSHION SHIELD LH SEAT: FRONT SEAT ASSEMBLY: REASSEMBLY (2008 LX570)+

3. INSTALL RECLINING POWER SEAT SWITCH KNOB SEAT: FRONT SEAT ASSEMBLY: REASSEMBLY (2008 LX570)+

4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB SEAT: FRONT SEAT ASSEMBLY: REASSEMBLY (2008 LX570)+

5. INSTALL FRONT SEAT ASSEMBLY LH

(a) Install the front seat assembly SEAT: FRONT SEAT ASSEMBLY: INSTALLATION (2008 LX570) .

6. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+