| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000395O002X |
| Title: SEAT: REAR SEAT CUSHION HEATER (for LH Side): INSTALLATION (2008 LX570) | ||
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY
(a) Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(b) Install the seat cushion heater with new tack pins.
2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER
3. INSTALL SEAT CUSHION COVER WITH PAD
4. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
5. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
6. INSTALL REAR SEAT UNDER TRAY COVER LH
7. INSTALL REAR SEAT CUSHION COVER RH
8. INSTALL REAR UNDER SIDE COVER LH
9. INSTALL REAR SEATBACK STAY COVER LH
10. INSTALL SEAT BELT ANCHOR COVER CAP
11. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
12. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
13. INSTALL REAR NO. 2 SEAT PROTECTOR
14. INSTALL REAR NO. 2 SEAT LEG SIDE COVER
15. INSTALL UPPER SEAT TRACK RAIL COVER RH
16. INSTALL UPPER SEAT TRACK RAIL COVER LH
17. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
18. INSTALL REAR NO. 1 SEAT RECLINING COVER LH
19. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
20. INSTALL SEAT ADJUSTER BOLT COVER
21. INSTALL REAR NO. 1 SEAT ASSEMBLY
(a) Install the rear No. 1 seat assembly
.
|
|