Home › Vehicle Interior › Seat › POWER SEAT SWITCH (for 60/40 Split Seat Type 40 Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: LX570 Doc ID: RM00000395V003X
Title: SEAT: POWER SEAT SWITCH (for 60/40 Split Seat Type 40 Side): REMOVAL (2008 LX570)

REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

(a) Remove the rear No. 1 seat assembly SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): REMOVAL (2008 LX570) .

2. REMOVE SEAT ADJUSTER BOLT COVER SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

6. REMOVE UPPER SEAT TRACK RAIL COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

7. REMOVE UPPER SEAT TRACK RAIL COVER RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

9. REMOVE REAR NO. 2 SEAT PROTECTOR SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

12. REMOVE REAR SEAT COVER SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

13. REMOVE REAR UNDER SIDE COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): DISASSEMBLY (2008 LX570)+

14. REMOVE REAR POWER SEAT SWITCH

(a) Remove the 2 screws and power seat switch.