Home › Vehicle Interior › Seat Belt › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for RH Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: LX570 Doc ID: RM0000039EH002X
Title: SEAT BELT: REAR NO. 1 SEAT INNER BELT ASSEMBLY (for RH Side): INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH



(a) Install the belt with the bolt.

Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)

NOTICE:

Do not overlap the anchor part of the seat belt and protruding parts of the seat.

2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): REASSEMBLY (2008 LX570)+

3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

(a) Install the rear No. 1 seat assembly SEAT: REAR NO. 1 SEAT ASSEMBLY (for RH Side): INSTALLATION (2008 LX570) .

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .