Home › Vehicle Interior › Door Lock › BACK DOOR LOCK
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Door Lock
Model Year: 2008 Model: LX570 Doc ID: RM0000039H5003X
Title: DOOR LOCK: BACK DOOR LOCK: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL BACK DOOR LOCK PROTECTOR (w/ Power Back Door)

(a) Attach the claw to install the protector A.

(b) Attach the 2 claws to install the protector B.

(c) Install the screw.

2. INSTALL BACK DOOR LOCK ASSEMBLY

(a) w/o Power Back Door:

(1) Install the door lock with the 3 bolts.

Torque: 13 N·m (133 kgf·cm, 10 ft·lbf)

(2) Connect the connector.

(b) w/ Power Back Door:

(1) Install the back door lock with the 4 bolts.

(2) Connect the connector.

Torque: 13 N·m (133 kgf·cm, 10 ft·lbf)

3. INSTALL BACK DOOR LOCK COVER

(a) Attach the 4 claws to install the cover.

4. INSTALL BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

5. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

6. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

7. INSTALL CENTER BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

9. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+