DOOR LOCK: BACK DOOR LOCK: REMOVAL (2008 LX570)

Home › Vehicle Interior › Door Lock › BACK DOOR LOCK

Last Modified: 11-27-2007		1.6 A
Service Category: Vehicle Interior	Section: Door Lock
Model Year: 2008	Model: LX570	Doc ID: RM0000039H8003X
Title: DOOR LOCK: BACK DOOR LOCK: REMOVAL (2008 LX570)

REMOVAL

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected .
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

7. REMOVE BACK DOOR LOCK COVER

(a) Detach the 4 claws and remove the cover.

8. REMOVE BACK DOOR LOCK ASSEMBLY

(a) w/o Power Back Door:

(1) Disconnect the connector.

(2) Remove the 3 bolts and door lock.

(b) w/ Power Back Door:

(1) Disconnect the connector.

(2) Remove the 4 bolts and door lock.

9. REMOVE BACK DOOR LOCK PROTECTOR (w/ Power Back Door)

(a) Remove the screw.

(b) Detach the 2 claws and remove the protector B.