Home › Steering › Steering Column › STEERING WHEEL
Last Modified: 11-27-2007 1.6 A
Service Category: Steering Section: Steering Column
Model Year: 2008 Model: LX570 Doc ID: RM0000039S7002X
Title: STEERING COLUMN: STEERING WHEEL: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL STEERING WHEEL ASSEMBLY



(a) Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

(b) Install the steering wheel assembly set nut.

Torque: 50 N·m (510 kgf·cm, 37 ft·lbf)

2. INSTALL STEERING SHAKE DAMPER



(a) Install the steering shake damper with 2 screws.

Torque: 2.4 N·m (25 kgf·cm, 21 in·lbf)

3. INSTALL CRUISE CONTROL MAIN SWITCH



(a) Install the cruise control main switch with the 2 screws.

(b) Connect the connector.

4. INSTALL STEERING PAD SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 LX570)+

5. INSTALL LOWER NO. 2 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 LX570)+

6. INSTALL LOWER NO. 3 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 LX570)+

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter INTRODUCTION: REPAIR INSTRUCTION: CUSTOMIZE PARAMETERS (2008 LX570) .

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 LX570) .