| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Steering | Section: Steering Column | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000039SB002X |
| Title: STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
(a) Install the ECU with the 2 screws.
Torque: 1.5 N·m (15 kgf·cm, 13 in·lbf)
(b) Connect the 2 connectors.
NOTICE:
The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.
2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY
3. INSTALL STEERING COLUMN ASSEMBLY
HINT:
Refer to the instructions for installation of the steering column assembly
.
|
|