| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003AVW001X |
| Title: AUDIO / VIDEO: LUGGAGE SPEAKER: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. REMOVE REAR SEAT CUSHION HINGE COVER RH
3. REMOVE REAR NO. 2 SEAT HINGE COVER RH
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
5. REMOVE REAR NO. 2 SEAT ASSEMBLY
(a) w/ Automatic Folding-up Function:
Remove the rear No. 2 seat assembly
.
(b) w/ Manual Folding-up Function:
Remove the rear No. 2 seat assembly
.
6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
7. REMOVE REAR STEP COVER
8. REMOVE REAR DOOR SCUFF PLATE RH
9. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
10. REMOVE REAR SEAT COVER CAP (for Rear No. 2 Seat with Manual Folding-up Function)
11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY
(a) Disconnect the connector.
|
(b) Remove the 5 bolts and box speaker. |
|
|