Home › Audio/Visual/Telematics › Audio/Video › STEREO JACK ADAPTER ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: LX570 Doc ID: RM000003AWD001X
Title: AUDIO / VIDEO: STEREO JACK ADAPTER ASSEMBLY: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL REMOTE CONTROL ADAPTER ASSEMBLY

(a) Install the adapter with the 2 screws.

2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

(a) Attach the 2 claws to install the stereo jack adapter.

4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

7. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+