| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003AWF001X |
| Title: AUDIO / VIDEO: STEREO JACK ADAPTER ASSEMBLY: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
5. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY
|
(a) Detach the 2 claws and remove the stereo jack adapter. |
6. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
7. REMOVE REMOTE CONTROL ADAPTER ASSEMBLY
|
(a) Remove the 2 screws and adapter. |
|
|