Home › Audio/Visual/Telematics › Audio/Video › MULTI-DISPLAY (w/o Navigation System)
Last Modified: 11-27-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: LX570 Doc ID: RM000003B6H003X
Title: AUDIO / VIDEO: MULTI-DISPLAY (w/o Navigation System): REMOVAL (2008 LX570)

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

5. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET

(a) Remove the 2 screws and 2 bolts.

(b) Pull the display to detach the 2 claws and 4 clips on the backside of the display.

(c) Disconnect the connectors and remove the display.

6. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 3 bolts and bracket.

7. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 3 bolts and bracket.