Home › Vehicle Exterior › Exterior Panels/Trim › BACK DOOR GARNISH (for Lower Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: LX570 Doc ID: RM000003CJG001X
Title: EXTERIOR PANELS / TRIM: BACK DOOR GARNISH (for Lower Side): REMOVAL (2008 LX570)

REMOVAL

1. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 LX570)+

2. REMOVE BACK DOOR TRIM COVER LH DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

3. REMOVE BACK DOOR TRIM COVER RH DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

4. REMOVE BACK DOOR TRIM PANEL ASSEMBLY DOOR / HATCH: TAIL GATE: DISASSEMBLY (2008 LX570)+

5. REMOVE NO. 2 BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE



(a) Remove the 2 nuts and disconnect the 2 connectors.

(b) Put protective tape around the garnish.

(c) Detach the 7 clips and remove the garnish.

HINT:

Detach the clips from the backside of the garnish.