| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Suspension | Section: Front Suspension | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003DGF001X |
| Title: FRONT SUSPENSION: FRONT STABILIZER BAR: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
5. LOOSEN FRONT NO. 1 STABILIZER BRACKET LH
|
(a) Loosen the 2 bolts of the front stabilizer brackets. |
6. LOOSEN FRONT NO. 1 STABILIZER BRACKET RH
|
(a) Loosen the 2 bolts of the front stabilizer brackets. |
7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
|
(a) Remove the bolt, nut and stabilizer link. HINT:
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud. |
8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
|
(a) Remove the bolt, nut and stabilizer link. HINT:
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud. |
9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH
|
(a) Remove the 2 bolts and stabilizer bracket from the front frame assembly. |
10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
|
(a) Remove the 2 bolts and stabilizer bracket from the front frame assembly. |
11. REMOVE FRONT STABILIZER BAR
(a) Remove the front stabilizer bar from the frame assembly.
12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH
(a) Remove the front stabilizer bar bush from the front stabilizer bar.
|
|