Home › Audio/Visual/Telematics › Park Assist/Monitoring › CLEARANCE WARNING BUZZER
Last Modified: 11-27-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Park Assist/Monitoring
Model Year: 2008 Model: LX570 Doc ID: RM000003E9X000X
Title: PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER



(a) Attach the clip to install the No. 1 clearance warning buzzer.

(b) Connect the connector.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Driver Side): INSTALLATION (2008 LX570)+

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

6. INSTALL NO. 1 SWITCH HOLE BASE INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

7. INSTALL INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

9. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+