Home › Vehicle Exterior › Door/Hatch › POWER BACK DOOR TOUCH SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: LX570 Doc ID: RM000003G8K000X
Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH

(a) Attach the 2 clips to install the power back door sensor assembly LH.

(b) Using a T25 "TORX" wrench, install the 6 screws.

(c) Connect the connector.

2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.

3. INSTALL BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

4. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

5. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

6. INSTALL CENTER BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+

7. INSTALL LOWER BACK DOOR STOPPER CUSHION DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 LX570)+