Home › Vehicle Exterior › Door/Hatch › POWER BACK DOOR TOUCH SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: LX570 Doc ID: RM000003G8N000X
Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE LOWER BACK DOOR STOPPER CUSHION DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

2. REMOVE CENTER BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

3. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

4. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

5. REMOVE BACK DOOR GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 LX570)+

6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH

(a) Disconnect the connector.

(b) Using a T25 "TORX" wrench, remove the 6 screws.

(c) Detach the 2 clips and remove the power back door sensor assembly LH.

7. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.