HYBRID TRANSAXLE OIL SEAL > INSTALLATION

1. INSTALL HYBRID TRANSAXLE OIL SEAL

2. INSTALL EXHAUST PIPE SUB-ASSEMBLY FRONT NO.3

3. INSTALL EXHAUST PIPE ASSEMBLY FRONT

4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

5. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

6. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING

7. INSTALL COWL TOP SILENCER PAD

8. INSTALL FRONT STABILIZER LINK ASSEMBLY

9. INSTALL FRONT AXLE ASSEMBLY

10. CONNECT FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1

11. CONNECT TIE ROD ASSEMBLY

12. INSTALL FRONT DISC

13. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH

14. INSTALL FRONT AXLE HUB NUT

15. INSTALL SPEED SENSOR FRONT

16. ADD AND INSPECT HYBRID TRANSAXLE FLUID

17. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

18. INSTALL ENGINE UNDER COVER NO.2

19. INSTALL ENGINE UNDER COVER NO.1

20. CHECK ABS SPEED SENSOR SIGNAL