HYBRID VEHICLE CONTROL ECU > INSTALLATION

1. INSTALL WIRE HARNESS CLAMP BRACKET

2. INSTALL ECM BRACKET NO.2

3. INSTALL ECM BRACKET NO.1

4. INSTALL HYBRID VEHICLE CONTROL ECU

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

6. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2

7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

8. INSTALL FRONT DOOR SCUFF PLATE RH

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. PERFORM INITIALIZATION