FUEL INJECTOR > INSTALLATION

1. INSTALL FUEL INJECTOR ASSEMBLY

2. INSTALL FUEL PIPE SUB-ASSEMBLY NO.1

3. INSTALL INTAKE AIR SURGE TANK

4. INSTALL EMISSION CONTROL VALVE SET

5. INSTALL AIR CLEANER CASE W/ RESONATOR

6. INSTALL AIR CLEANER CAP W/ INLET

7. INSTALL COOL AIR INTAKE DUCT SEAL

8. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER

9. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

10. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

11. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

12. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. ADD COOLANT

15. CHECK FOR ENGINE COOLANT LEAKS

16. CHECK FOR FUEL LEAKS

17. INSTALL ENGINE ROOM COVER SIDE

18. INSTALL ENGINE ROOM SIDE LH COVER

19. PERFORM INITIALIZATION