FUEL TANK > INSTALLATION

1. INSTALL FUEL TANK CUSHION

2. INSTALL CLAMP

3. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

4. INSTALL FUEL TANK TO CANISTER TUBE SUB-ASSEMBLY

5. INSTALL FUEL TANK WIRE

6. INSTALL FUEL PUMP AND GAUGE WITH SUCTION TUBE

7. INSTALL FUEL TANK ASSEMBLY

8. CONNECT FUEL TANK TO FILLER PIPE HOSE

9. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

10. CONNECT FUEL TANK TO CANISTER TUBE SUB-ASSEMBLY

11. INSTALL CHARCOAL CANISTER PROTECTOR

12. CONNECT FUEL TANK WIRE

13. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3

14. INSTALL FUEL TANK PROTECTOR SUB-ASSEMBLY NO.1

15. INSTALL FRONT FLOOR HEAT INSULATOR NO.3

16. INSTALL EXHAUST PIPE ASSEMBLY CENTER

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

18. ADD FUEL

19. CHECK FOR FUEL LEAKS

20. CHECK FOR EXHAUST GAS LEAKS

21. PERFORM INITIALIZATION