DTC    B2610    Tilt Position Sensor or Tilt Motor Circuit Malfunction

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

PERFORM ACTIVE TEST BY INTELLIGENT TESTER

CHECK HARNESS AND CONNECTOR (BETWEEN TILT & TELESCOPIC ECU AND TILT MOTOR)

INSPECT TILT MOTOR

CHECK HARNESS AND CONNECTOR (BETWEEN TILT & TELESCOPIC ECU AND TILT POSITION SENSOR)

CHECK HARNESS AND CONNECTOR (BETWEEN TILT & TELESCOPIC ECU AND BODY GROUND)

INSPECT MULTIPLEX TILT & TELESCOPIC ECU (VCI, TIS TERMINAL VOLTAGE)

INSPECT TILT POSITION SENSOR