DTC    C1311/11    Open in Main Relay 1 Circuit

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

PERFORM ACTIVE TEST BY INTELLIGENT TESTER (ABS NO.1 RELAY, ABS NO.2 RELAY)

INSPECT ABS MAIN RELAY (ABS NO.1 RELAY, ABS NO.2 RELAY)

INSPECT FUSE (ABS NO.1, ABS NO.2 AND ABS NO.3 FUSES)

INSPECT SKID CONTROL ECU (+BI1, +BI2 TERMINAL)

INSPECT SKID CONTROL ECU (+BO1, +BO2, R1+, R2+ TERMINAL)

INSPECT SKID CONTROL ECU (BS1, BS2 TERMINAL)