BLOWER UNIT > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE RH

3. REMOVE COWL SIDE TRIM RH SUB-ASSEMBLY

4. REMOVE INSTRUMENT PANEL UNDER COVER NO.2 SUB-ASSEMBLY

5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

6. REMOVE HYBRID VEHICLE CONTROL ECU

7. REMOVE AIR DUCT NO.2

8. DISCONNECT WIRING AIR INDICATOR HARNESS NO.2 SUB-ASSEMBLY

9. REMOVE BLOWER ASSEMBLY