ELECTRIC INVERTER COMPRESSOR > INSTALLATION

1. ADJUST COMPRESSOR OIL

2. INSTALL SERVICE VALVE (LHD Type:)

3. INSTALL ELECTRIC INVERTER COMPRESSOR

4. INSTALL COOLER REFRIGERANT SUCTION HOSE NO.1 (LHD Type:)

5. INSTALL COOLER REFRIGERANT SUCTION HOSE NO.1 (RHD Type:)

6. INSTALL COOLER REFRIGERANT DISCHARGE HOSE NO.1

7. INSTALL BATTERY

8. INSTALL POWER STEERING ECU BRACKET

9. INSTALL INVERTER RESERVE TANK SUB-ASSEMBLY

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. CHARGE WITH REFRIGERANT

12. WARM UP COMPRESSOR

13. CHECK FOR LEAKAGE OF REFRIGERANT

14. PERFORM INITIALIZATION