ELECTRIC INVERTER COMPRESSOR > REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE SERVICE PLUG GRIP

4. SEPARATE INVERTER RESERVE TANK SUB-ASSEMBLY

5. DISCONNECT POWER STEERING ECU BRACKET

6. REMOVE INVERTER COVER

7. VERIFY THAT VOLTAGE OF W/ CONVERTER ASSEMBLY IS 0V

8. INSTALL INVERTER COVER

9. REMOVE BATTERY

10. REMOVE BATTERY CARRIER SUB-ASSEMBLY

11. DISCONNECT COOLER REFRIGERANT DISCHARGE HOSE NO.1

12. DISCONNECT COOLER REFRIGERANT SUCTION HOSE NO.1 (LHD Type:)

13. REMOVE COOLER REFRIGERANT SUCTION HOSE NO.1 (RHD Type:)

14. REMOVE ELECTRIC INVERTER COMPRESSOR

15. REMOVE SERVICE VALVE (LHD Type:)