POWER STEERING GEAR > INSTALLATION

1. INSTALL POWER STEERING LINK ASSEMBLY

2. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

3. CONNECT TIE ROD ASSEMBLY LH

4. CONNECT TIE ROD ASSEMBLY RH

5. CONNECT STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY

6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

8. INSTALL ENGINE UNDER COVER NO.2

9. INSTALL FRONT WHEELS

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

12. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

13. PERFORM INITIALIZATION

14. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT