POWER STEERING GEAR > REMOVAL

1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

2. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT WHEELS

4. REMOVE ENGINE UNDER COVER NO.2

5. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH

6. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

7. SEPARATE STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY

8. SEPARATE TIE ROD ASSEMBLY LH

9. SEPARATE TIE ROD ASSEMBLY RH

10. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

11. REMOVE POWER STEERING LINK ASSEMBLY