THROTTLE BODY > INSTALLATION

1. INSTALL THROTTLE BODY ASSEMBLY

2. INSTALL AIR CLEANER CASE W/ RESONATOR

3. INSTALL AIR CLEANER CAP W/ INLET

4. INSTALL COOL AIR INTAKE DUCT SEAL

5. ADD COOLANT

6. CHECK FOR ENGINE COOLANT LEAKS

7. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

9. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

11. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. INSTALL ENGINE ROOM COVER SIDE

14. INSTALL ENGINE ROOM SIDE LH COVER

15. PERFORM INITIALIZATION