FUEL PUMP > REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE EXHAUST PIPE ASSEMBLY CENTER

4. REMOVE FRONT FLOOR HEAT INSULATOR NO.3

5. REMOVE FUEL TANK PROTECTOR SUB-ASSEMBLY NO.1

6. SEPARATE PARKING BRAKE CABLE ASSEMBLY NO.3

7. DISCONNECT FUEL TANK WIRE

8. REMOVE CHARCOAL CANISTER PROTECTOR

9. DISCONNECT FUEL TANK TO CANISTER TUBE SUB-ASSEMBLY

10. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

11. DISCONNECT FUEL TANK TO FILLER PIPE HOSE

12. REMOVE FUEL TANK ASSEMBLY

13. REMOVE FUEL PUMP AND GAUGE WITH SUCTION TUBE

14. REMOVE FUEL SENDER GAUGE ASSEMBLY

15. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

16. REMOVE FUEL PUMP HARNESS

17. REMOVE FUEL SUCTION SUPPORT NO.2

18. REMOVE FUEL PUMP CUSHION RUBBER

19. REMOVE FUEL PUMP AND FUEL FILTER ASSEMBLY

20. REMOVE FUEL PRESSURE WITH JET PUMP REGULATOR ASSEMBLY