STEREO COMPONENT AMPLIFIER > INSTALLATION

1. INSTALL STEREO COMPONENT AMPLIFIER (w/ Mark Levinson System)

2. INSTALL STEREO COMPONENT AMPLIFIER (w/o Mark Levinson System)

3. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

4. INSTALL DECK SIDE TRIM BOX LH

5. INSTALL DECK SIDE TRIM BOX RH

6. INSTALL JACK CARRIER ASSEMBLY

7. INSTALL REAR FLOOR FINISH PLATE

8. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY

9. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY

10. INSTALL DECK FLOOR BOX REAR

11. INSTALL DECK FLOOR BOX FRONT

12. INSTALL DECK BOARD SUB-ASSEMBLY

13. INSTALL TONNEAU COVER ASSEMBLY

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

15. PERFORM INITIALIZATION