SKID CONTROL ECU > REMOVAL

1. PRECAUTION

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT DOOR SCUFF PLATE RH

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

5. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY (for LHD)

6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

7. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (for RHD)

8. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (for RHD)

9. REMOVE AIR CONDITIONER AMPLIFIER ASSEMBLY

10. REMOVE SKID CONTROL ECU ASSEMBLY