DATA LIST / ACTIVE TEST
System information
| READ DATA LIST |
- HINT:
- Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Read the Data List.
WIPER: Item
Measurement Item / Display (Range)
Normal Condition
Diagnostic Note
F WIPER SW
Front Wiper switch/ ON or OFF
ON: Front wiper is operated
OFF: Front wiper is not operated
-
WIPER LO SW
Wiper LO switch input/ON or OFF
ON: Front wiper switch is in LO position
OFF: Front wiper switch is in any position other than LO
-
WIPER HI SW
Wiper HI switch input/ ON or OFF
ON: Front wiper switch is in HI position
OFF: Front wiper switch is in any position other than HI
-
WIPER AUTO SW
Wiper AUTO switch input/ON or OFF
ON: Front wiper switch is in AUTO position
OFF: Front wiper switch is in any position other than AUTO
-
WASHER SW
Washer switch input/ON or OFF
ON: Front washer switch is in ON position
OFF: Front washer switch is in OFF position
-
TIME CTL SW
Wiper volume switch position/deg
Value can be displayed.
-
SPEED MODE
Speed mode/NOT AVL or AVAIL
Customized sign can be displayed.
-
AUTO WIPER
Auto wiper/NOT AVL or AVAIL
Customized sign can be displayed.
-
REWIPE CONTROL
Rewipe control/OFF/3s./SPD MOD
Customized sign can be displayed.
-
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Perform the Active Test.
WIPER: Item
Test Details
Diagnostic Note
WIPER MOT (HI)
Front wiper motor HI operation ON / OFF
-
WIPER MOT (LO)
Front wiper motor LO operation ON / OFF
-